Sports Realm

Since Ford tuning and modifying are so expensive, are they really worth the cost and effort? Only the car owner can decide that. A lot depends on the purpose you have in doing it. If your idea is to save on fuel, then you probably won’t benefit. But, if your goal is a more powerful engine, then it probably be beneficial to you. Just be aware that you might end up spending a lot of money in a short time if you do not keep a watch on it.

There are three major areas of engine modifications. These are volumetric efficiency, thermal efficiency, and mechanical efficiency. Each improves engine performance in a different, unique way. A good manual addressing these areas can help you understand them. However, just knowing they improve efficiency of your engine may be enough for you.

Some modifications that are not as common, considered “exotic, ” are the following: in-depth cylinder head modifications, nitro-methane injection, nitrous-oxide injection, turbo-charging, supercharging, and ethanol and methanol injection. All of these are ways to get more horsepower from your engine.

Having knowledge of basic fundamentals of fuel injection and engine management before undertaking any modification is vital. Even when you order the job done by someone else you would benefit from having this basic knowledge. You will not only stand a chance of not getting the best performance, you can seriously damage your car.

Many books are available giving basic information and even directions about how to do some tasks. You can get these books at an online auction or even online of offline bookstores. There are books specific to certain car models and some are more generic. Some things addressed by these books are fuel injection, auto computers, recalibrating you engine, standalone systems that can be programmed to your specs, and installation, designing, and troubleshooting basics. These are only a few of the topics that can be found.

You may want your car tuned just to save on fuel and increase efficiency. This type tune up is simple. Directions can be gotten online. Most anyone can do this type task. It is also a pretty inexpensive job to have someone else do. The savings in fuel cost and the increase in engine performance will more than offset the cost. To do this tune up, you have to change and gap spark plugs, change the air filter, and clean battery posts.

Ever since the first Ford Model T was modified, people have been changing their car bodies. Some changes are very easy and almost anyone can do them. Body kits can be bought that will give step by step directions. These can be bought almost anywhere, online or offline. Most are pretty inexpensive. After reading the directions you feel you can’t do the job, don’t hesitate to get it done by someone else. You don’t want to damage your car.

As we have seen, modifying and tuning involves both modifying the engine and the body. Tuning can be designed to improve fuel and performance, or to increase the power your engine has. Decide before you start what you actually want out of your modification, and how much you are willing to pay. When you begin the actual Ford tuning and modifying, take a look at any routine maintenance and repairs you may have been neglecting. This is a good time to address them as well.

Nasser is very active in racing and has bee involved in motorsport for over five years. Get the low down on Ford tuning in our forums.